Measure for your Shutters
Now that you have determined how your Shutter will be fitted, you are ready to take measurements. All you have to do now is provide the exact measurements for your choice of fitting.
A) Measuring - Inside Recess
Width
Width measurement Take *3 measurements Top, Middle and bottom inside your recess and make a note of the smallest measurement. we advise to take another 6mm off your smallest measurement. This is to allow the shutter to be fitted square in your recess. if not fitted square your shutter doors will not open and close correctly.
Drop
Take *3 measurements left, middle and right, also take another 6mm off from smallest measurement. These will be the final measurement you use when placing your order on the website.
B) Measuring - Outside Recess
Width
Take *3 measurements from the edge of the recess and choose the largest width. To your measurement, add 4.5cm for each side of the frame (left & right frame = 9cm). This will be the width you use when placing your order on the website.
Drop
Take *3 measurements from the edge of the recess and choose the largest height. To your measurement, add 4.5cm for each frame (top & bottom frame = 9cm). This will be the height you use when placing your oder on the website.
Top and bottom frames are optional, bear this in mind when adding your total frame width.
C) Measuring - No Recess
Width
Take *3 measurements from the outside edge of your window frame and choose the largest width. To your measurement, add 4.5cm for each side of the frame (left & right frame = 9cm). This will be the width you use when placing your order on the website.
Drop
Take 3* measurements from the outside edge of your window frame and choose the largest height. To your measurement, add 4.5cm for each frame (top & bottom frame = 9cm). This will be the height you use then placing your order on the website.
Top and bottom frames are optional, bear this in mind when adding your total frame width.
